Octagon Grille Fire Pit image and description

The captivating photograph below, is other parts of Octagon Fire Pit content which is grouped within Fire Pits, and published at October 31st, 2015 17:46:32 PM by .
Octagon Fire Pit: Octagon Grille Fire Pit

After the construction of a regular polygon in terms of its vertices is driven columns desired height, plus one at the point of intersection of the diagonals. Then another two pillars that support the joists later. Each bar is necessary to drill. There stuck pipe 15 cm in diameter, is stuck into the pipe fitting so that it is above the level of the inserted pipe. Next fixtures filled with cement mortar. Once everything hardens, cut the Bulgarian rebar so that it remains above the level of the tube 5 cm. After that, going first waist rail size. Get the right octagon with internal parallel spaced beams. At the corners, using dowels and screws put vertical bars-rack. They are selected round, square or triangular. Above them is a wooden rail, cut at an angle so that the board is well laid on octagon fire pit.

Here is crucial tip on . We have the greatest step for . Check it out for yourself! You can get Octagon Grille Fire Pit guide and read the latest Octagon Fire Pit in here.

Back to Octagon Fire Pit

Photo Gallery of The Octagon Grille Fire Pit

Related Post from Octagon Fire Pit